Mugen

This is a ceramic bearing kit for the all new Mugen Seiki MRX5 from our Ceramic Nitride Pro Series World Champion bearing series. Now available!

MUGEN MBX6 Ceramic Nitride Pro Series Ceramic Ball Bearing Kit which also fits the Mugen MBX6T

The MBX-6 buggy is all new from the chassis up! The MBX6 has all new design front and rear suspension components, front and rear bulkheads, all the drive train is light weight to reduce rotating mass, aluminum front pillar balls and the list goes on. The layout for the engine, fuel tank and radio gear have been moved as close a possible to the center of the chassis to make the MBX6 as nimble as possible. Even the ball bearing design has been changed over the previous model with the use of 15x21 mm ball bearings . Mugen Seiki Racing used its World Championship knowledge to continue to be the leader in the 1/8 off-road buggy market. What's more, the Mugen MBX6 took 3rd place at the 2008 IFMAR World Championships on it's first outing! European Champion Renaud Savoya drove the MBX6 to a 3rd place finish after having only a few days of practice with the buggy.

This ceramic ball bearing kit contains the following ceramic bearings

14 - 8x16 mm

4 - 15x21 mm

4 - 6x10 mm

2 - 5x10 mm

Mugen MRX 4X Ceramic Nitride Pro Series Ceramic Ball Bearing Kit

This kit is an upgraded version of the World Champion winning MRX4. The MRX-4X has new suspension parts, and all the high-end options that where sold separately now all in one kit.

Features

• Rear Upper Arm (2mm Shorter)
• Brake Bracket & Rear Upper Arm Mount for short rear upper arm
• Rear upright (Adjustable wheel offset)
• Front bulkhead. You can change the tension of the belt (5 different positions)
• Rear bulkhead. You can change the tension of the belt (5 different positions)
• New Eccentric Hub
• 5mm New Rear Lower Arm Mount
• New Battery Holder (FRP) & Chassis
• New Long rear body Mount Arm & Rear Body

This ceramic bearing kit contains the following ceramic ball bearings

4 - 6x10 mm

4 - 12x18 mm

4 - 6x13 mm

8 - 12x21 mm

2 - 10x15 mm flanged

2 - 5x10 mm clutch bearings

2 - 5x10mm flanged

MUGEN MTX4R Ceramic Nitride Pro Series Ceramic Ball Bearing Kit

Mugen Seiki Racing released the MTX4R 1/10 Touring car as an upgraded version of the World Champion winning MTX4. The MTX4R has new suspension parts, new one way/solid front axle and all the high-end options that where sold separately now all in one kit. Also include is a complete set of GRP foam tires, Aluminum Wheel Hubs New Front Lower Suspension Arm allowing for more steering from the front upright Graphite Rear Upper Arm Mount. A new front upright has a 2 degree king pin angle for better steering. Further upgrades are front universal Joint Sets, rubber front belt, rubber rear belt, rubber middle belt, rear universal joint set. A new front one way drive axle can be used as a one-way or it can be converted to a solid front axle by locking up the one-way. Complete adjustability for all racing conditions New Front Joint Cup Ventilated Brake Disk Aluminum Engine Mount.

Our ceramic ball bearing kit makes this new setup fly. Here's what's included:

4 - 10x15 mm ceramic bearings

7 - 5x8 mm ceramic bearings

2 - 5x10 mm Flanged ceramic bearings

8 - 6x13 mm ceramic ball bearings

4 - 12x18 mm ceramic ball bearings

CERAMIC NITRIDE PRO SERIES BALL BEARING KIT MUGEN MRX4R

This ceramic bearing kit contains the following:

4 - 6x10 mm

4 - 12x18 mm

4 - 6x13 mm

8 - 12x21 mm

2 - 10x15 mm flanged

2 - 5x10 mm flanged

2 - 5x10 mm

CERAMIC NITRIDE PRO SERIES CERAMIC BALL BEARING KIT for the Mugen Seiki MRX4 This ceramic bearing kit contains the following ball bearings:

4 - 6x10 mm

4 - 12x18 mm

4 - 6x13 mm

8 - 12x21 mm

2 - 10x15 mm flanged

2 - 5x10 mm flanged

2 - 5x10 mm

CERAMIC NITRIDE PRO SERIES CERAMIC BALL BEARING KIT MUGEN MTX-4

Our ball bearing kit for this legendary car includes

4 - 10x15 mm

7 - 5x8 mm

2 - 5x10 mm Flanged

8 - 6x13 mm

4 - 12x18 mm

Mugen MBX7 Eco Ceramic Ball Bearing Kit. If you are looking for the MBX7 Ceramic Bearing kit please click here.