EXTRA 10% off BEARINGS

      min order $40 use code SR20

      Shop Now

      RC bearing oil, bearing grease, bearing cleaner

      Lube so good it should be a SIN, and it is.  When we developed SIN our goal was to formulate a 100% synthetic oil that was Made in USA & engineered to be the BEST bearing oil ever!  A superior blend of synthetic base oils and additive technology allows bearings to run cooler, smoother, faster, longer and quieter. This revolutionary synthetic bearing oil displaces moisture & protects against rust & corrosion while forming a slippery synthetic ionic bond & micro-polishing bearing elements. Formulated to be extremely thin and light for the least resistance. If you use the best bearings, why not use the best synthetic lubricant? Available in a convenient 1 ounce squeeze bottle.

      Many of our loyal customers have asked us what the best way is to clean our bearings. And we found a solution! The RPM Bearing Blaster device is a simple and convenient way to clean your bearings without removing the seals! Cleaning a bearing without removing the seal is the preferred method and the Bearing Blaster easily accomplishes just that. Simply place the bearing in the device and squirt some non-chlorinated motor cleaner through the assembly and you are done! Then simply relube with a drop or two of our SIN synthetic bearing lube onto the seal. SIN will seep through the seal and penetrate the bearing without removing the seal. It's that simple.

      ACERGoo is the highest performance synthetic grease on the planet. It can be used in ball bearings , gears, CVD joints, anywhere traditional grease is used. It is made of the same synthetic base oils as our SIN bearing oil but in a grease, allowing bearings and gears to run smoother, cooler and quieter. It has excellent oxidation resistance and outstanding extreme pressure properties. Special additive technology creates an ultimate slippery coating on parts helping to prevent metal to metal and ceramic to metal contact in bearings and gears. As with our SIN bearing oil, ACERGOO displaces water from metal surfaces and protects against corrosion. For high performance racing applications we recommend SIN bearing oil as it is a lightweight oil which will not slow down your ball bearings like a grease can; however, ACERGOO is perfect for clutch bearings, 1:5 scale bearings, gears, dogbones, CVD joints, air filters, skate bearings and any high load high stress location where a super high performance synthetic grease is required. Any grease will cause greater friction than oil inside a ball bearing; however, many bearing applications do not require top speed or the engine/motor is displacing so much torque that bearing resistance is not an issue. Hence ACERGoo is also ideal for these situations.

      4 products

      4 products