EXTRA 10% off Bearings & Balls
USE CODE SR20
ACER Racing introduces ACERTi: our latest line of Titanium screws which are manufactured using the finest Aerospace Grade 6AL4V Titanium to achieve the hardest and lightest titanium screws, titanium nuts, and titanium bolts. Check out our full line of M3, M4, M5, M6 and M8 titanium screws with flat heads, button heads, cap heads, tapered heads, 12 point heads and flanged heads. We use ONLY 6AL4V Titanium and not the cheaper Grade 1 or 2 titanium other manufacturers use. While the lower grades may look similar to 6AL4V Titanium and are easier to cut, they do not have anywhere near the amazing strength of our Grade 5 6AL4V Titanium screws which is over 400% stronger.
6AL4V Titanium properties include a tensile strength of 1000 MPa (megapascals) which is the equivalent of 145000 psi. By comparison, annealed type 316 stainless steel has tensile strength of only 570 MPa (82670 psi), tempered 6061 aluminium alloy has tensile strength of 310 MPa, and Grade 1 Titanium has a tensile strength of only 240 MPa (34809 psi). Do not accept lower grade titanium - use only the best: ACERTi.
14x1.5 Titanium Lug Nuts Open End
If you need these in an M12 size pleae click HERE
Porsche Titanium Wheel Studs & Nuts M14x1.5
6AL4V Aerospace Grade Titanium wheel studs and nuts for Porsche and any other wheel application that uses M14x1.5 including Lamborghini and many others.
Studs are available in 2 lengths: 70mm overall and 80mm overall. Both have a 15mm rotor side thread length. The 70mm studs have 35mm thread length on the wheel side. The 80mm studs have a 45mm thread length on the wheel side.
Nuts are available in 2 seat types: original ball seat for Porsche wheels and cone seat for most aftermarket wheels (please check your wheel to see if it needs ball seat or cone seat and order accordingly)
Rolled threads for the greatest strength and fatigue resistance.
M14x1.5 Titanium Lug Nuts
20 piece 6AL4V Titanium stud nuts: will not heat degrade like steel studs with repeated use + 50% lighter and corrosion free Total length is 21mm Thread Pitch: M14x1.5 with 60 degree cone base
Many applications including a direct Tesla lug nut replacement.
These are a direct replacement but in the highest grade titanium (Grade 5 6AL4V Titanium) Manufactured from aerospace grade 6AL4V Titanium, these titanium lug bolts will not corrode or rust and offer 50% weight savings over steel lug bolts while giving a very sporty and aggressive look.
Important Notes Please take the necessary measurements to ensure proper fitment. Installation should only be performed by a trained professional. Make certain to get 5-7 FULL TURNS of your lug nuts/bolt before tightening.
M14x1.5x34 Titanium Lug Nuts for Dodge Challenger Hellcat and Charger
6AL4V Titanium Lug Nuts for the Dodge Challenger SRT Hellcat made from the strongest grade titanium for 50 % less weight than steel + zero corrosion + heat fatigue resistant.
Equivalent dimension to OEM part 6509873AA
20 nuts per order